Request Information Download PDF
GT-91116-10VV-P GT-91116-10VV-P
Information
Model NumberGT-91116-10VV-P
DescriptionGT-91116-10VV-P, ITE Power Supply, Potted/Encapsulated in plastic housing, Regulated Switchmode AC-DC, , Input Rating: 100-240V~, 50-60 Hz, Input Wires 85 and 95 mm stranded UL1015 or equivalent, Blue=Neutral and Brown=Line, Output Rating: 10 Watts, 3.3-48V in 0.1V increments, Approvals: WEEE China RoHS CE Level V RoHS 2 SIQ
Agency Documents
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0Oa000000FibnREAR
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0Oa000000FibnREAR
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypePotted/Encapsulated in plastic housing
TechnologyRegulated Switchmode AC-DC
CategoryITE Power Supply
Input Voltage100-240V~, 50-60 Hz
I/P Amps (A)0.9 A
Wattage (W)10
Vout Range (V)3.3-48
EfficiencyV
Ingress ProtectionIP68
Size (mm)52.0 x 48.5 x 23.5
Enclosure
User-added image
Rating Table
Model NumberVoltageAmps (A)Watts (W)RFQ
GT-91116-1012-P120.83310RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
03. Output Regulation: +/- 5% measured at the output connector
04. Line Voltage Regulation: +/- 5% typical measured at full load
05. Output Ripple (Vp-p): +/-1% or 50 mV whichever is greater, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector at nominal line
06. Turn-ON/OFF Overshoot: 4% maximum, 500uS typical recovery time for 25% to 50% step load
07. Turn-ON Delay: 3000 mS, maximum @ full load, nominal line
08. Hold-Up Time: 8 mS typical @ nominal input voltage and full load
09. Inrush Current: 30A maximum cold start @ 240Vac input
10. Switching Frequency: 66.5 KHz typical
11. Efficiency: 75% Typically

B) PROTECTION
01. Over-Voltage: Electronically Protected via Zener Diode across output
02. Short Circuit: Electronically Protected via Hiccup unit will auto recover upon removal of fault
03. Input Protection: Input line fusing

C) SAFETY
01. Dielectric Withstand Voltage: 4242Vdc from primary to secondary
02. Touch Current: <0.25mA @ 240Vac input voltage

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 40°C ambient temperature
03. Humidity: 0% to 90% relative humidity
04. Storage Temperature: -40°C to 80°C
05. Cooling: Convection
06. ROHS 2: Complies with EU 2011/65/EU and China SJ/T 11363-2006

E) ENCLOSURE
01. Housing: High impact plastic, 94V0 polycarbonate, non-vented
02. Markings: Label and/or Pad Printed and/or Molded in the case
03. Enclosure dimensions: 55.4 x 52.0 x 23.5 mm
03. Ingress Protection: IP68
Derating Curve
Qty (ea.)/Carton125
Individual Box/Gift Box Size (mm)Egg Crate
Individual Box/Gift Box Color
Master Carton Size (mm)375*375*217
Gross Weight (kg)17.0
Label Width (mm)40.0
Label Height (mm)18.0
Input Configuration
DescriptionInput Wires 85 and 95 mm stranded UL1015 or equivalent, Blue=Neutral and Brown=Line
Output Configuration
Common output connector options:

L Type (Coaxial 5.5x2.5mm plug)

C Type (Coaxial 5.5x2.1mm plug)

K Type (Coaxial 3.5x1.3mm plug)

LL Type (5.5x2.5mm Locking 760k type)

CL Type (5.5x2.1mm Locking S761k type)

ML2 Type (Molex housing 43025-0200)

YL3 Type (KPPX-3P)

YL4 Type (KPPX-4P)

EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)

MSB Type (Micro USB)

USBC Type (USB Type C)

Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
User-added imageBook 60335 up to 36 Volts
User-added image  CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15B - On label or Molded in case
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added image
 
Fuse 60335 T1.0A 250VAC Up to 36 volts
 User-added image

Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf
User-added image
IEC/EN60335-1
SIQ IEC/EN 60335-1 (Safety of Household and Similar Electrical Appliances, Part 1: General Requirements) up to 36 volts
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
271467120.83Waterproof IP68 Molded Female Plug, 2 sockets, 3.0mm Pitch, Equivalent to KCC sk2/2

Demande d'info